Touréchaf

T O U R é C H A F : S H O R I N G T O W E R W I T H I N T E G R A L S A F E T Y S Y S T E M 6 TOURéCHAF Assembling and dismantling a 1.50 x 1.50 m tower... Dismantle in the reverse order of assembly... > 4 - Fit 2 access platforms and add the second level. > 5 - Fit one access plat- form. > 6 - Move up to the next level and fit the second access platform. > 7 - Add the third level. > 8 - Raise the first access platform. > 9 - Raise the second access platform from the bottom level. > 10 - The bottom deck can be removed.The upper level can be accessed using the integral ladder. > 11 - Fit and adjust the adjustable heads. HOISTINGWITH LIFTINGRINGS Complywith thegeneralhandling rulesof the MillsTourechaf technicalnoticeavailableon www.mills.fr/en/ SWIVELLINGOFTHEFRAMES FROM INSIDETHETOWER Complywith thegeneral handling rulesof the MillsTourechaf technical noticeavailableon www.mills.fr/en/ Fabriqué en France > 1 - Erect the base and level it.Verify taht the base is saquare by pushing an access platform to one side. > 2 - From the inside of the tower, fit the first frame diago- nally and swivel to lock it. > 3 - Fit the access frame for easy access. Fit a temporary deck Raise the access platforms to their final position so that there is a height of 2.00 m between floors. Made in France Access frame on base level only A video of the erection is available on www.mills.fr/en... ASSEMBLY REQUIREMENTS > Ensure that the load is evenly distributed on the ground. > Ensure that the base is level. >Assemble the first level of frames from the inside of the tower. > Position the hatch above the ladder. > Ensure that the tower is stable. > Centre the load in the forks. > Check that the jacks are vertical. Two 1.50 m access platforms