Touréchaf

18 TOURéCHAF T O U R é C H A F : S H O R I N G T O W E R W I T H I N T E G R A L S A F E T Y S Y S T E M Compatibility with scaffolding... Legend ce Frame Access frame Ledger Diagonal brace Ledger for wind bracing Diagonal brace for wind bracing 0.20 m decking panel. Access platform Standard T ouréchaf towers can be joined together, without using tube and coupler systems, so that they form blocks or rows. Each 1 m high standard must be braced and anchored at both ends and in both directions. The deck panels must be parallel to the ledger on the side where the diagonal brace is mounted to prevent interferences between the brace and the hooks at the end of the deck panels. ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce 1.50 1.00 1.50 1.50 1.50 1.00 1.00 1.00 Assembling components of towers with 6 standards - On the outside of the first level, there should be 2 access frames, preferably with 1.50 m spacing. Inside and on all levels, there should be 1 diagonal brace and 1 ledger. >Tower with 6 standards: ce ce ce ce ce ce ce ce Assembling components of towers with 9 standards: - On the outside of the first level, there should be 2 access frames, preferably with 1.50 m spacing. - Inside of all levels, there should be 1 standard frame, 3 diagonal braces and 3 ledgers. >Towers with 9 standards: 1.50 1.50 1.50 1.00 1.00 1.00 1.50 1.50 1.50 1.00 1.00 1.00 NB: The middle standards must be braced using ledgers and diagonal braces at all levels.