Touréchaf

> Moving: If assembled on a concrete slab, the towers can be moved easily by hand using the special trolleys. Do not move towers that have more than three levels (four levels for adjustable trol- leys). > Lifting: The tower has integral lifting rings so that it can be moved by crane. The operation is easy and safe as the frames and screw jacks for- ming the tower are automati- cally locked to- gether. T ouréchaf has been specially designed to reduce manual handling injuries. Standard parts weigh less than 15 kg and are easy to handle. The design makes it easy to lift by crane reducing the number of times it has to be dismantled and assem- bled. The unit weight of standard parts is less than 15 kg to reduce manual handling injuries... > Handling: The Touréchaf frames are fitted using a single insertion point from inside the tower. Fitting the decking: 45° maxi. Lower the decking while leaning on the frame. Screw jack with threaded sleeve. There are two handles under the decking so that it can be raised easily. Raising the decking from below: > Storage: The frames are stored vertically, ready to be assembled. No need to bend down to pick them up. Ergonomic design... TOURéCHAF To make it easier to fit the decking, hold the end in position with the right hand and fo- rearm and fit the 2 hooks under the ladder first. 4 levels 5 levels 17 cm mini. >Access: 2 access platforms should be fitted every 2.00 m as landings. T O U R é C H A F : S H O R I N G T O W E R W I T H I N T E G R A L S A F E T Y S Y S T E M 12 Ultimate load : 1250 kg for an angle de < 45°. Adjustable tower trolley Shoring tower trolley