Touréchaf

T O U R é C H A F : S H O R I N G T O W E R W I T H I N T E G R A L S A F E T Y S Y S T E M 10 TOURéCHAF Dismantle in the reverse order of assembly... Erecting and dismantling a tower with 6 standards... Monter un niveau de plancher en position provisoire > 2 - From the inside of the tower, fit the first frame diagonally and swivel to lock it. > 1 - Erect the base and level it. Verify taht the base is saquare by pushing an access platform to one side. > 3 - Assembling the second level. > 4 - Fitting a second deck. > 5 - The tower must be braced using ledgers and diagonal braces. > 6 - Move up to the next level and fit the fourth access platform. > 7 - Fit the frames for the third level. > 8 - Move the first two access platforms. Erection of towers with 6 standards Basic frame Ledger Diagonal brace Raise the access platforms to their final position so that there is a height of 2.00 m between floors. Fit a temporary deck NB: The middle standards must be braced using ledgers and diago- nal braces at all levels. ASSEMBLY REQUIREMENTS: > Ensure that the load is evenly distributed on the ground. > Ensure that the base is level. > Erect the first level of frames from the inside of the tower. > Position the hatch above the ladder. > Ensure that the tower is stable. > Centre the load in the forks. > Check that the jacks are vertical .