Escalib Mills_GB

15 E s C A L I B M I L L s M D s : s I T E s P I R A L s T A I R C A s E W I T H s I D E E X I T EsCALIB MILLs MDs Case 1 Case 2 Case 3 Case 4 T he 4 configurations below show an Escalib Mills oriented such that classic access via the front face is provided at level N (floor slab side). Depending on the height between the two floors, the upper level N+1 is accessed from one of the four sides of the tower: - the front face (floor slab side): case 1 - one of the sides: cases 2 and 4 - or the rear face: case 3. Case 1 : Classic access via the front face is provided at level N+1. Cases 2 and 4 : access at level N+1 is provided from the side with an overhanging gangway. Case 3 : level N+1 is at the same height as the steps on the rear face stringer, so access must be via this face. To simplify erection, access is provided by an overhang from the steps of the side face just above it. A short set of steps leads down to the floor slab. > Configuration of the exits depending on the orientation of the Escalib Mills: Side Side Rear face Front face Side Side Rear face Front face Side Side Rear face Front face Side Side Rear face Front face Level N +1 Level N +1 Level N Level N Level N +1 Ground level Level N Ground level Level N Ground level Ground level Level N +1 0.65 or 1.00 0.65 or 1.00 1.00